When installing rubber gangways, the following details should be noted to ensure their safety, stability, and durability:
1.
Material selection:
Choose high-quality rubber materials, such as natural rubber or synthetic rubber, to ensure they possess sufficient elasticity and wear resistance.
Ensure that the rubber gangway ladder has moderate hardness and elasticity, which can serve as a buffer while maintaining its shape.
2.
Size design:
Based on the size of the ship and the characteristics of the dock structure, determine the length, width, and thickness of the rubber gangway to ensure that it can cover the part of the ship that comes into contact with the dock and effectively absorb the impact force.
3.
Fixing method:
Choose an appropriate fixing method, such as bolt fixation, steel bar fixation, or steel wire rope fixation, to ensure that the fender can be tightly fitted to the dock structure, avoiding displacement or detachment during collisions with waves and ships.
4.
Installation location:
The installation location of rubber gangways should be reasonably designed, typically at the part where the ship comes into contact with the dock and at the berthing position of the ship, to avoid interference with anchor chains, ropes, or other debris.
5.
Installation steps:
Clean the installation area to ensure that the surface is flat and free of debris.
According to the design requirements, measure and mark the installation position and direction of the rubber gangway.
Pre-drill screw holes on the rubber gangway and support structure using an electric drill, and then use a screwdriver to secure the rubber gangway to the support structure.
After completing the installation, inspect the fixation of each installation point to ensure it is secure and reliable.
6.
Regular maintenance:
Regularly inspect the rubber gangway for hardness, elasticity, and any cracks, wear, or aging on the surface. Promptly repair or replace damaged parts to ensure the service life and protective effect of the gangway.
7.
Safety precautions:
During the installation process, use safety protective equipment such as gloves, goggles, and helmets.
Pay attention to the ventilation and lighting conditions at the construction site to ensure a good working environment.
Smoking or using open flames during installation is strictly prohibited to ensure the safe operation of electric tools.
